Using Windows Mobile ActiveSync

• As of March 2007, the current version is 4.5

ActiveSync is available as a
free download from www.microsoft.com/windowsmobile/.

Running a newer version? Let us know.

Microsoft’s ActiveSync software works with Windows XP SP2 or earlier. If you have the Windows Vista Operating System, you shouldn’t use ActiveSync. Instead, your synchronization settings will be managed through the Windows Mobile Device Center.

Windows Mobile Device Center can be downloaded from Microsoft’s Mobile Device Center page.

• "No device profiles are available" – I found this after
  realising that my AvantGo syncs were out of date, and looking
  in the AvantGo connection settings. I had no "device profiles"
  set, and the "add" button was grayed out. This appeared to be
  a problem with the partnership. In the end I had to delete the
  partnership and start again. I think the problem was down to
  the fact that I’d installed ActiveSync whilst logged on to a
  Windows 2000 PC as a local administrator. When I ran as my normal
  user, the registry entries weren’t correct. Deleting the partnership
  solved this. If you’re having problems deleting a partnership from ActiveSync, you can try to delete manually by removing the following folder from Windows Explorer: "C:\Documents and Settings\< login name>\Application Data\Microsoft\ActiveSync\Profiles\< device name>"
• "The device name is already in use. You must enter a different
  name for your mobile device" – This happened to me on a
  Windows XP machine where I had two users with two different
  Pocket PCs. When I connected a Pocket PC, ActiveSync was picking
  up the wrong Pocket PC. If I switched partnerships, I was asked
  to create a new one, then refused permission as the name existed.
  The solution seemed to be as follows: 1) Connect, but switch
  off the Pocket PC 2) Go to ‘File | Mobile device’. 3) Delete
  the device partnership – you’ll lose your ActiveSync settings,
  but not your data or backups. 4) Switch on the Pocket PC and
  follow the instructions to create a new partnership. You
  can also see this if you’ve hard-reset your machine… see below
• Problem with ActiveSync partnership after reset – If
  your Pocket PC gets hard-reset, when you first connect to ActiveSync,
  you may be told that your Partnership name is in use ("This
  device name is already in use. You must enter a different name
  for your mobile device"), forcing you to connect as Guest.
  
  To get back to normal, don’t set up a partnership – instead
  connect as "Guest". From the ActiveSync menu, select
  "Backup/Restore" app, and restore your most recent
  backup. Once restored, reset the Pocket PC, and all should be
  well.
• Connecting as ‘Guest’ – If your Pocket PC / Windows Mobile device has been reset, you may find that when you try to sync, you’re only able to connect as ‘Guest’. Make sure that the device name matches the ActiveSync Profile name (on the device, go to Start > Settings > System > ‘Device ID’ tab. Also, make sure the device regional settings match (Start > Settings > System > ‘Regional settings’)
• "Restore cannot be completed successfully. The selected
  backup file was created from a different type of mobile device."
  – You’ll see this under a couple of circumstances: either
  you’ve recently done a software upgrade (a new release of the
  operating system / ROM upgrade) and are trying to restore a
  backup that applies to the older software operating system.
  More commonly, you’ll see this after having reset your machine,
  and the device is set to a different region to the region in
  use when it was backed up (it defaults to US English). Go to
  ‘Settings > System > Regional settings’, and switch to the appropriate
  language.
• "Communications error: Cannot start communications with the desktop computer. Reconnect your device" – If you see this dialog appear when trying to sync using wi-fi… you may well have recently upgraded to ActiveSync v4.x. If you’ve upgraded to a newer version of ActiveSync and found wi-fi sync to be broken, note that this is by design – as statement on the Microsoft v4.1 download page says "Remote PC Sync (via Wifi or LAN) has been removed due to Enterprise customer feedback around security issues". So, if you want wi-fi sync, we suggest you downgrade to ActiveSync v3.8
• USB connection problem? See below

If you’ve connected your Pocket PC to a PC’s USB, and are having problems getting the PC to recognise the Pocket PC device, try some of the following:

• Download the latest version of ActiveSync from Microsoft and try that
• Check out the Troubleshooter under the ActiveSync ‘Help menu’
• Try connecting to a different USB port on the PC
• Try connecting to a different PC (to check whether the problem is with the phone or the PC)
• On the Pocket PC, go to ActiveSync > menu > Connections and make sure ‘USB’ is selected for Sync.
• Try connecting again, this time with your software firewall disabled
• Try resetting the Pocket PC
• Try a clean uninstall of ActiveSync, then reinstall the latest version
• Check in Windows Control panel > System > Device manager to see if there are any PC conflicts
• Try a different USB device in the USB slot, to check the USB slot is working
• Try connecting via Bluetooth
• See ‘Problems‘ above
• Try asking in our forum – provide details, error messages and info from the Troubleshooter

If you come across Pocket
PC software asking you to pick one of these three options, the
one to go for is almost certainly ARM. These options represent
earlier days of Pocket PC development, where an application had
to be compiled for a specific processor. Just about all of the
Pocket PC 2002 / 2003 devices are ‘ARM’ (including IPAQ and Loox).
Early Casio Cassiopeia were MIPS and the early HP Jornadas were
SH3.
If you see software making this distinction, it indicates the
software may have been complied a few years ago, and therefore
may not run on the latest machines. If in doubt, check with the
software author

Some details of a weird problem that we discovered after upgrading from 3.8 to 4.1 of Activesync…

After installing ActiveSync 4.1.0 for use with our Qtek S200, we found that our PC’s Internet connection kept dropping out and we were seeing with Windows XP "A network cable is unplugged" message. We lost our Internet connection and found a number of odd TCP/IP messages in the XP Event Log. After a trawl around the ‘net, we think we found the answer. ActiveSync 4.x uses TCP/IP for synchronisation, which means that an Activesync connection to a Pocket PC appears to XP as a network connection, and in some cases, it seems that this connection conflicts with other network connections. There seem to be a couple of things that may need tweaking in some cases:

Firewall – There’s some advice on Microsoft’s Activesync Help page about setting up PC firewall software to allow TCPIP port 26675 to be associated with ActiveSync. That page provides a walkthrough for the common Firewall apps

Network conflicts – This is the one that solved our problem. When ActiveSync is installed, it’s set as a standard network connector. Disabling a couple of options prevents the network connector from aggressively conflicting with other network connectivity. Try the following:

• Connect the Pocket PC to the PC, and allow ActiveSync to connect
• Go to Start > Control panel > Network Connections
• Under LAN connections, there should be an entry for your network card, and a new one, for your PPC
• Select the one for the PPC (by trial-and-error, right-click and select ‘Properties’) – You need to find the one marked "Windows Mobile-based Device".
• Untick ‘Client for Microsoft Networks’ and ‘File and Printer Sharing for Microsoft Networks’ and then click ‘Ok’

• Network card speed – No idea why this should make a difference, but it did. Changing the network speed that our network card connected to the router from "Auto" to "10Meg Full duplex" resolved this for us. To change this, go to Start > Settings > Network, then right-click on your network connection (e.g. Local area connection #2), and select Properties. Press the Configure button, then the Advanced button. Look for the option labeled something like "link properties"